|
|
| (2 tussenliggende versies door één gebruiker worden niet weergegeven) |
| Regel 1: |
Regel 1: |
| − | [[categorie:Interfaces]] | + | [[Bestand:LocoBufferUSB.PNG|thumb|150px|LocoBuffer-USB]] |
| | + | =='''LocoBuffer-USB Features'''== |
| | + | |
| | + | * USB 1.1 & 2.0 to LocoNet® interface with type B USB connector |
| | + | * 2,500 VAC Optical isolation between USB and LocoNet® |
| | + | Keep your system up and running through ground loops, spikes, and surges. Rogue currents and |
| | + | ground loops can wreak havoc with your data, and even damage your PC or connected devices. |
| | + | * Buffered inputs and outputs allow use with all operating systems with USB support. |
| | + | CD includes drivers for Mac OS-9, OS X, MS Windows 98SE, ME, 2K, XP, Vista, Vista 64. |
| | + | Linux drivers are included with the latest versions of Linux. |
| | + | * Packaged unit size just 1-1/2" x 3" x 3/4" |
| | + | Ready to run unit includes cables and driver CD. Nothing extra to purchase. |
| | + | * Internal LocoNet® terminator. |
| | + | Allows a LocoBuffer-USB to add LocoNet® device compatibility to other systems. |
| | + | * 57,600 Baud interface speed |
| | + | No jumpers or switches to set. |
| | + | * Compatible with existing RR software (JMRI, RR&Co, and WinLok) |
| | + | Installs as a serial VCP (Virtual Com Port) in latest software versions. |
| | + | * Hardware handshaking using RTS/CTS |
| | + | Includes DTR/DSR turn back as required by MS Windows XP and Vista. |
| | + | * USB Boot Loader for firmware upgrades |
| | + | Does not require any special hardware to install firmware upgrades. |
| | + | * Powered directly from USB port and LocoNet® connections |
| | + | No external power adapter required. |
| | + | * Includes USB A-B and LocoNet® cables |
| | + | |
| | [[Categorie:LocoNet Interfaces]] | | [[Categorie:LocoNet Interfaces]] |
Huidige versie van 20 mrt 2010 om 21:25
Fout bij het aanmaken van de miniatuurafbeelding: convert: no decode delegate for this image format `' @ error/constitute.c/ReadImage/564.
convert: no images defined `/tmp/transform_6516020034ac-1.png' @ error/convert.c/ConvertImageCommand/3235.
LocoBuffer-USB Features
- USB 1.1 & 2.0 to LocoNet® interface with type B USB connector
- 2,500 VAC Optical isolation between USB and LocoNet®
Keep your system up and running through ground loops, spikes, and surges. Rogue currents and
ground loops can wreak havoc with your data, and even damage your PC or connected devices.
- Buffered inputs and outputs allow use with all operating systems with USB support.
CD includes drivers for Mac OS-9, OS X, MS Windows 98SE, ME, 2K, XP, Vista, Vista 64.
Linux drivers are included with the latest versions of Linux.
- Packaged unit size just 1-1/2" x 3" x 3/4"
Ready to run unit includes cables and driver CD. Nothing extra to purchase.
- Internal LocoNet® terminator.
Allows a LocoBuffer-USB to add LocoNet® device compatibility to other systems.
- 57,600 Baud interface speed
No jumpers or switches to set.
- Compatible with existing RR software (JMRI, RR&Co, and WinLok)
Installs as a serial VCP (Virtual Com Port) in latest software versions.
- Hardware handshaking using RTS/CTS
Includes DTR/DSR turn back as required by MS Windows XP and Vista.
- USB Boot Loader for firmware upgrades
Does not require any special hardware to install firmware upgrades.
- Powered directly from USB port and LocoNet® connections
No external power adapter required.
- Includes USB A-B and LocoNet® cables
